SmallHD Camera Control for Canon (Software Only)
This is a digital software license download that enables real-time configuration of Canon C70*, C80, C300mkIII, C400, and C500mkII cameras. Update your monitor to the latest firmware in order to use Canon Camera Control.
*C70 requires a USB-C to Ethernet adapter.
View your shot, control your settings, and dive into camera menus from our award-winning PageOS software platform. Save time and effort by adjusting your Canon camera settings right from your SmallHD monitor.
- Adjust Shutter Speed, Aperture, ISO, ND, Codec, and trigger record Start/Stop
- Touch to Focus Compatibility
- Navigate through the camera deep menu UI
For step-by-step activation instructions, click here.
Supported Monitors:
- Cine 5
- Ultra 5 / Ultra 5 RX / Ultra 5 TX
- Cine 7
- CINE7 500 RX / CINE7 500 TX / CINE7 SK RX
- Ultra 7 / Ultra 7 RX (750 & 1500) / Ultra 7 TX (750 & 1500)
- Ultra 10 / Ultra 10 RX
- Cine 13
- Cine 18
- Cine 24
- Vision 17
- Vision 24
- OLED 22
- OLED 27
- Quantum 27
- Quantum 32
Connecting camera control walkthrough by camera model:
Canon Camera Control EOS C300 Mark III / EOS C500 Mark II
Canon C400 Camera Control
Canon C70 Camera Control Setup
Canon C80 Camera Control Setup
For a specific hardware connection breakdown for each compatible monitor click here.
Connection & Adapter Requirements
Some USB-C to Ethernet Adapter adapters may not work with C70 Camera Control. If you already own an adapter and it is not working, please use one of the following tested and approved adapters:
USB-C to Gigabit Ethernet Adapter | Belkin US
If using direct connection you will need:
Ethernet cable which has two RJ45 connectors at each end.
If using a direct ethernet connection with C300mkIII/C500mkII, you will need a Canon EU-V1, EU-V2, or EU-V3 Expansion Unit
If you are using a direct ethernet connection to Cine 5, you will need a 5-Pin USB to Ethernet Adapter.
If you are using a WiFi connection on C300mkIII/C500mkII you will need WFT-E9A
If are using a 5 or 7 inch monitor for WiFi connection you will need a third party adapter and Locking Connector to USB Adapter Cable (4K Production Monitors have USB already, which can be used for a 3rd party WiFi adapter).
If you are using this adapter with Cine 7 you will also need Micro USB to 5-pin Adapter.
Disclaimers:
- Once any camera control is registered in your SmallHD monitor, it can not be removed or transferred to a different monitor.
- Canon’s protocol does not allow playback with camera control.
